Maintenance Rules for the Running-in Period of Newly Purchased Garbage Trucks

Maintenance Rules for the Running-in Period of Newly Purchased Garbage Trucks

 

There is always a process of adaptation when you buy something, and the more you use it, the better it is. The newly purchased sanitation garbage truck is no exception. It also requires an adaptation process. This process is called the running-in period. So how should the sanitation garbage truck operate during the running-in period, and what maintenance must be known during the running-in period? Let’s learn together:

The correct operation steps of the sanitation garbage truck during the running-in period: the running-in period of the vehicle generally refers to within 3000-5000 kilometers (specifically refer to the manual). The speed should be kept below 80 km/h.

Try to warm up the car first every time you start the vehicle. Generally, the warm-up time is 30 seconds. If you have driving experience, you can let the vehicle idle for 20 seconds instead of warming up the car in place, which is better. Try not to go at high speed during the break-in period. If you really want to go at high speed, please keep the speed below 100 kilometers per hour.

When loading and unloading garbage trucks during the break-in period, do not overload, do not Overspeed, do not misuse, and operate according to the instructions or the methods taught by the manufacturer.

The above is the operation of the sanitation garbage truck during the running-in period. Let’s take a look at the maintenance of the vehicle in stages during the running-in period:

  1. Within 100 kilometers: The friction brake pads have not yet reached 100% braking effect, and the tire friction is not enough. Therefore, when braking, use more force than normal. In addition, in terms of inspection and maintenance, the exposed bolts and nuts should be tightened. , Add fuel, oil, add coolant, check the air pressure of transmission, front and rear drive axles, drive shafts, hubs and tires, check the braking capacity of lights, batteries, and braking systems;
  2. 100-500 km: The tire adhesion has not yet reached the best effect. Drivers should try to avoid emergency braking when cornering quickly. In addition, in terms of inspection and maintenance, the engine oil should be replaced at this time, and the oil pan should be cleaned with kerosene and replaced. oil filter, and tighten the front and rear hub nuts;
  3. 500-2500 km: Drivers and friends should drive gently, the speed should not exceed 100 kilometers per hour, and the speed should not exceed 2500 rpm;
  4. 2500-3500 kilometers: When the water temperature reaches the working temperature, the driver can increase the speed to the maximum speed or the maximum engine speed. In addition, if your car is a domestic car, you need to replace the transmission, main reducer, and steering gear. the gear oil inside, and check and adjust the clutch pedal.
  5. After routine maintenance of 3000 kilometers, the coordination between all moving parts in the car reaches a smooth state, which can give full play to the best performance of the vehicle.

The above is the maintenance of the newly purchased sanitation garbage truck in stages during the running-in period. This maintenance is very important because it is to keep the mechanical system of the new car in the best condition and prolongs its service life. Driver friends must not ignore it.

 

Contact us for this municipal truck or similar trucks: [email protected]

Call us or What's APP us: +86 189 4292 3930

Leave a Reply

Your email address will not be published. Required fields are marked *